The Banks Six-Gun Diesel Tuner has six power levels that you can adjust with either the Six-Gun switch (supplied) or the optional Banks iQ Dashboard PC (sold separately). Banks iQ is a versatile device that gives you total control of your Banks Six-Gun Tuner.
Advertising
96448 v.12.0
27
To be performed on part number
62977 only. If installing part number
62979, skip to section 7 on
page 29
.
Your Six-Gun Diesel Tuner (with or
without the Speed Loader) needs to
know the correct power rating of your
engine in order to provide the proper
calibration and tuning. The correct
engine power rating can be found on
the tag in the engine compartment at
one of the locations shown in Figure
20. The power rating is typically shown
in the upper right hand corner of the
tag. The rated power should be 235,
250 or 305 hp. If the rating is different,
contact Gale Banks Technical Support.
Follow the steps described below
(Step 1 to 6) to teach your Six-Gun
Diesel Tuner the power rating of your
engine. As shipped, the Six-Gun Diesel
Tuner is calibrated for a 305 hp (High
Output) engine. If you have a 305
hp rated engine, skip to Section 7,
“cHEcKING ENGINE PERFORMANcE”
on
page 29
.
1.
If you have a 235 hp or 250
hp rated engine, remove the
thermocouple leadwire from the Six-
Gun Diesel Tuner box connection.
Kaspersky safe kids. Insert the provided engine rating
jumper key into the Six-Gun Diesel
Tuner box thermocouple connection.
See Figure 21.
2.
Turn the key to ON position (DO
NOT start engine) and wait 5 seconds.
3.
Turn the key to OFF position, wait
5 seconds and turn the key to ON
position (DO NOT start engine) and
wait 5 seconds.
4.
Again, turn the key to OFF position,
wait 5 seconds and turn the key to ON
position (DO NOT START ENGINE) and
wait 5 seconds.
5.
When the procedure is completed
correctly, the Six-Gun Diesel Tuner will
flash the red LED once.
SECTION 5
ENGINE POWER RaTING LEaRNING PROCEDURE
Figure 20
Advertising
Popular Brands
Popular manuals